AEROCHAMBER PLUS FLOW-VU (ADULT)


Price:
RM99 MYR RM109 MYR
Stock:
In stock

Description

Registration Number:

An Anti-Static Valved Holding Chamber (VHC) helps individuals with poor coordination during the inhalation of MDI medications. It also helps to reduce throat irritation due to poor inhalation of the MDI inhaler and aid in better MDI medication absorption. This increases the medicine’s effectiveness.

- Flow-Vu indicator: The flap moves when the patient inhales, so the caregiver can visually monitor if the patient is inhaling correctly.

- Anti-static Chamber: Improves the delivery of MDIs used with AeroChamber due to medication not adhering to chamber walls. Latex, lead, PVC, phthalate, and BPA free.

- ComfortSeal mask: Provides critical face mask seal and is soft and comfortable. ‘EZ Flow’ Extension Valve: Directs exhaled medication away from patient’s face and eyes.

- Inhalation Valve: Built-in, low-resistance, one-way valve opens easily and prevents exhalation back to the chamber.

- Universal Adapter: Fits most commonly prescribed MDIs.

- Suitable for adult

Ingredients:

Aerochamber, face mask, mouthpiece

Dosage/How to use:

How to use (Face Mask):

1. Visually check for any foreign particle inside the chamber

2. Remove the cap from the MDI inhaler

3. Shake the MDI inhaler up and down 5 times before each use

4. Attach the MDI inhaler into the back piece of the chamber

5. Apply the mask firmly onto the face

If it is effectively sealed, the Inspiratory Flow Indicator (IFI) will move towards the face mask

6. Press the pump of the inhaler, breath in and out like normal breath for 5 times

Slow down inhalation if a whistling sound is heard

7. Repeat steps 3 - 6 if another puff is required

8. Detach the inhaler from the aero chamber and keep the both MDI and aero chamber in a dry, cool place

How to use (Mouthpiece):

1. Visually check for any foreign particle inside the chamber

2. Remove the cap from the MDI inhaler

3. Shake the MDI inhaler up and down 5 times before each use

4. Attach the MDI inhaler into the back piece of the chamber

5. Exhale away from the mouthpiece

6. Cover the mouthpiece tightly with mouth

If it is effectively sealed, the Inspiratory Flow Indicator (IFI) will move towards the mouthpiece

7. Press the pump of the inhaler, breathe in slowly and deeply, then hold breath for 5-10 seconds

Slow down inhalation if a whistling sound is heard

8. Remove the mouthpiece and exhale via nose with mouth tightly shut

9. Repeat steps 3 - 8 if another puff is required

10. Detach the inhaler from the aero chamber and keep the both MDI and aero chamber in a dry, cool place

Cleaning procedure:

1. Remove the back piece by pulling

2. Remove the front piece (with mask) by twisting

3. Soaks the part in (lukewarm water + mild detergent) for 15 minutes

4. Briefly agitate the parts in pure lukewarm water and shake dry

5. Put the parts in a dry towel, allowing it to airdry in a vertical position

6. Reassemble the part after the parts are dried

Caution:

 

1. Do not heat or boil the chamber above 70 degrees Celcius

2. When cleaning, do not rub with a sponge or towel

3. Do not share the chamber due to personal hygiene issue

Estimate shipping

You may also like

Recently viewed